Gedore 3418340 Workshop Trolley, Bearings and Bushings - GD KL-4999-270

The assembly trolley "MODULO 270" with its unique composition is the ideal, mobile workstation for fast, organized, and efficient repairs. Included in the modulo: Various drive parts such as hydraulic cylinder 17t KL-0040-2500, ring ratchet/open-end spanners, impact extractors 4.8 kg - KL-0049-31 as well as pull/thrust spindles (mechanical, hydraulic), quick-clamping nuts and adaptors of the KL-0039.series for driving the tool kits, Articulated handle KL-4007-411 as well as power spanner/socket spanner sockets (SK / TX / XZN) for loosening and tightening of wheel bearing central screws, Locking ring pliers KL-0192-5 for the disassembly and assembly of wheel bearing locking rings, Wire brush for de-rusting and cleaning various components, Wheel hub puller KL-0041-38. as well as wheel bearing tool kits of the KL-0041-4. Series for pressing out and in of wheel hubs and wheel bearing units, for example on VW, Audi, Seat, Skoda and Ford, Mazda, Volvo, Pullers of the KL-0174. Series for pulling standard wheel bearings as well as pressing out bonded and stuck cardan shafts, Hook KL-0049-360 A for pulling of wishbones from the suspension joint clamping hole, Wheel bearing tool kits of the KL-0039. series for pressing out and in of nearly all standard wheel bearings and wheel hubs, Silent block tool kits of the KL-0039. series for pressing out and in of silent blocks and joints bearings, Pressing devices of the KL-0326-1. series for pressing out and in support/guide joints; for example, on Mercedes and VW T4, Pressing devices of the KL-0610-1. series for pressing out and in silent blocks on rear axle trailing arms; for example, on Ford, Mazda, Volvo, Wheel bearing tool KL-2211-111. for pulling stuck screwed wheel bearing units; for example, on Subaru, Holding device KL-0115 for counter holding wheel hubs when loosening and tightening the wheel bearing central bolt, Pullers of the KL-0042-9. series for pulling stuck wheel bearing inner races on the wheel hub, Clamping KL-0121-96. To compress lug clamps and locking of stepless hose clips, Forcing tool of the KL-0165. series for separating ball joint connections on steering and axle systems, Eccentric spanner KL-0167-30 for loosening and tightening inner tie bar joints or axial joints, Disassembly fork KL-0190-12 to check bearing and joint connections on vehicle axes, and to disassemble various parts. Further information on the assembly trolley: Dimensions: H 985 x W 1200 x D 635 mm, Beech multiplex worktop, 30 mm thick, oiled, Total load carrying capacity: 1000 kg / mobile operation: 750 kg, 2 fixed castors Diameter 200 mm and 2 swivel castors Diameter 125 mm with total brake, Sheet steel, corrosion-resistant, scratch-resistant powder-coated in GEDORE blue, Wide drawers (W 998 x D 474 mm) with full extension, max. load 70 kg, Automatic drawer retraction with single pull-out stop and central locking system, Side walls with Euro perforation 10 x 38 mm for attaching hooks and tools.

Features:

• Universally applicable for repairs on wheel bearings, steering and axle systems on passenger cars and vans
• The ideal, mobile workstation for quick and organized maintenance work
• Content / range of application - Various drive parts for driving the tool kits
• Forcing out and pressing in of wheel bearings and wheel hubs
• Forcing out and pressing in wheel hubs / bearing units
• Pulling of wishbones from the support joint clamping hole
• Forcing off glued and stuck cardan shafts
• Forcing out and pressing in suspension and guide joints, silent blocks and joint bearings
• Pulling off stuck screwed wheel bearing units
• Counter-holding of wheel hubs when loosening and tightening the wheel bearing central bolt
• Pulling off stuck wheel bearing inner rings on the wheel hub
• Compressing lug clamps and locking of stepless hose clips
• Forcing off ball joint connections on steering and axle systems
• Loosening and tightening of inner tie rods or axial joints
• Including helpful hand tools

Specifications:

• Suitability: Universal
• Color: Blue
• Depth: 635mm
• Drawer Type: Full Extension
• Height: 985mm
• Load Capacity (Dynamic): 750 kgs
• Load Capacity (Static): 1000 kgs
• Number of Drawers: 4
• Weight: 595.35 lbs
• Width: 1.200mm
• Country of Origin: Germany