Accessories: DC cable, AV cable, 4GBSD card (sample), dedicated viewer software, installation manual, warranty Front camera: Ultra wide angle 120 degrees 300,000 pixel CMOS sensor with WDR, External camera: Optional, Recording resolution: VGA 640 ×480 Maximum 30fps (with built-in camera), GPS: Built-in GPS, Shock sensor: Built-in 3D G-sensor, Supported media: SD memory card (~32GB), Audio: Built-in microphone Power supply: DC12V/24V (built-in backup capacitor), Recording method: Event recording (shock sensor) / Hybrid (event + constant) recording, Main unit playback function: Yes (with real-time output function), Real-time clock: Automatic time adjustment by GPS, External dimensions: (W) 55 mm × (H) 32mm × (D)120mm *Excluding protrusions, body weight: 145g

1) Built-in GPS and 3D G sensor as standard. This records detailed driving history, speed, and acceleration. Also, since it is built into a small body, it can be installed neatly without blocking the field of view. 2) The CMOS sensor with WDR enables video recording that is close to the naked eye with suppressed overexposure and underexposure. It is very effective in reducing overexposure near the exit of a tunnel and overexposure caused by headlights when driving at night, and it is no exaggeration to say that this function is essential for drive recorders where recording is important. In addition, a 120 degree horizontal wide-angle lens ensures a wide field of view. 3) The recording file has high resolution VGA image quality (640x480) and a frame rate of 30FPS that reproduces smooth movement, while a 32GB SD card allows long-term recording of up to 33 hours or more. It has achieved a good balance between the conflicting elements of recording time and image quality. 4) An SD card is used as the recording medium. This allows you to select an SD card with the optimal capacity for each purpose and use, making it possible to operate with high cost performance. SD cards up to 32GB can be used. We have also updated the recording algorithm to the SD card, successfully reducing SD card troubles caused by repeated recording. 5) The built-in microphone allows you to record sounds inside the car and around you. You can select whether or not to record audio by setting. In addition, even when the main unit is operating, it is possible to record audio or mute it by pressing the button. 6) Hybrid recording mode that keeps recording everything endlessly. A 32GB SD card allows continuous recording for up to 33 hours. Furthermore, in the "Hybrid" recording mode, if an impact is detected, the video is saved as an event file in a separate folder, making it easier to find the desired file from the huge amount of recorded data. When an impact is detected, it automatically records 30 seconds before and after (10 seconds before/20 seconds after). (*4) Automatically records near misses. 7) During hybrid recording (continuous recording), recording files are saved in sections of 1 minute. Also, normally there is a file gap of about 2.3 seconds (blank time that is not recorded) between files, but this machine, like our previous models, has a small file gap (0.05 seconds or less). Masu. 8) One external camera can be added as an option. This allows you to record video from two cameras simultaneously, including the built-in camera. 9) Compatible with everything from general 12V vehicles to 24V vehicles such as large vehicles as standard. 10) The built-in clock is corrected using accurate time information sent from GPS satellites, and records are always recorded at accurate time. 11) If the power from the car is cut off due to an accident, etc., the built-in large capacity backup capacitor will be used as a backup power source to continue operating for about 5 seconds and write data to the SD card. This increases the reliability of data storage in the event of an emergency. 12) The drive recorder has a simple playback function. By connecting the video input of a car navigation system or monitor, you can check the recorded video on the spot. In addition, you can easily check speed, time, acceleration, vehicle position, etc. using the map-linked viewer software that comes standard. 13) It is possible to monitor the actual image displayed on the car navigation system while the main unit is operating. It can be used for positioning during installation and monitoring the operation of this machine. 14) Simply attach the main unit to the top of the windshield and insert the cigarette plug cord. It can be easily and discreetly installed along with the small body. Note (Disclaimer) > Please read Disclaimer: We do not guarantee that all troubles will be recorded. * In order to configure this unit (sensitivity settings, etc.) and view recorded video, you will need a computer that meets the specifications below and a reader/writer that supports SD cards. Please prepare the necessary equipment separately. - A computer equipped with Microsoft Windows XP, Vista, or 7 that can display a resolution of 1280 x 800 pixels or higher.・A reader/writer compatible with SD cards that supports 4GB or more and a code for connection.・Please use the SD card that comes with the product or the one recommended and sold by us. Other cards may not operate properly. Notes ●This unit detects impact (acceleration) and records images before and after an accident, but recording of images may not be possible in all situations.


Manufacturer: CASTRADE
Brand: CASTRADE
Product size: 12 x 5.5 x 3.2 cm; 145 g
Product model number: CJ-DR450
br>Special notes: ‎Built-in, built-in microphone
Product dimensions: Depth x Width x Height: ‎12 x 5.5 x 3.2 cm
Color: ‎Black
Product weight: ‎145 g